Panasonic AW-RP60 Remote Camera Controller - Manual (Page 36)

36
Initializing the connection destination IP
addresses set on the unit
Use the following procedure to initialize the connection types and
connection destination IP addresses set on the unit.
1. Select the [RP INITIALIZE] MAINTENANCE menu.
2. Operate the menu operation dials to select [INIT ALL]
and press to confirm.
RP INITIALIZE 1/1
INIT
ALL
NO? NO?
INIT
AW-UE70
3. Turn the F1 dial to execute initialization.
The settings for connecting with the remote cameras are initialized.
When this operation is performed, all the settings on this unit are
returned to the factory default conditions.
z z [CAM1] is initialized to [Serial].
[CAM2] to [CAM200] are initialized to [NON].
z z If the IP address of the unit is changed, the connection destination
IP addresses are changed automatically.
• IP addresses after the IP address of the unit are set for the
camera numbers in ascending order.
Settings for connecting with the remote cameras (continued)