Panasonic AW-RP60 Remote Camera Controller - Manual (Page 58)

58
Menu
(continued)
Item Setting value Setting details
OUT2 CAM1
CAM2
⁞
CAM200
Notification is sent to CAMERA_SELECT_OUT2 of the port of the TALLY/GPIO connector when the
set camera is selected.
OUT3 CAM1
⁞
CAM3
⁞
CAM200
Notification is sent to CAMERA_SELECT_OUT3 of the port of the TALLY/GPIO connector when the
set camera is selected.
OUT4 CAM1
⁞
CAM4
⁞
CAM200
Notification is sent to CAMERA_SELECT_OUT4 of the port of the TALLY/GPIO connector when the
set camera is selected.
OUT5 CAM1
⁞
CAM5
⁞
CAM200
Notification is sent to CAMERA_SELECT_OUT5 of the port of the TALLY/GPIO connector when the
set camera is selected.
z z With regard to the operations of CAMERA_SELECT_IN of the port of the TALLY/GPIO connector, if a CAMERA number outside of the currently
selected CAMERA group is specified, there is a switch in the CAMERA group. Selection of the camera may take some time in this case.
z z Operations in regard to the CAMERA_SELECT_OUT of the port of the TALLY/GPIO connector will be operations on the applicable camera
number in the currently selected camera group.
Notes