HP 2000CP 2500CP - Manual (Page 333)

Table for Fiery X2-W Network Setup
Obtain information from the network administrator or the contact at the customer site to
fill in the column on the far right if you do not have a Configuration page from the
Fiery X2-W that was deinstalled.
Network type
Information from the
network administrator
Fiery X2-W
settings/enter
data
Comments
Setting/value to
be input at
Fiery X2-W Setup
AppleTalk AppleTalk zone List of zones If your segment has only one zone,
the Fiery X2-W is assigned to that
zone automatically.
TCP/IP Communication speed via
Ethernet Auto Detect
100 Mbps
10 Mbps TP
10 Mbps AUI 10 Mbps TP and 10 Mbps AUI
refer to how the Ethernet cable is
connected to the Fiery X2-W
either through twisted pair cable on
the RJ-45 port or through the AUI
port.
IP address [Enter data]
Subnet Mask [Enter data]
Gateway address [Enter data]
IPX/SPX
in a Novell
network
environment Frame types Ethernet 802.2
Ethernet 802.3
Ethernet II
Ethernet SNAP
NetWare Directory Services
(NDS) or Bindery or both NDS Setup
Bindery Setup Version of Novell NetWare—
Version 4.x (NDS) or version 3.x
(Bindery)
IPX/SPX
(NDS) NDS tree for Fiery X2-W
to log into List of NDS trees Browse to find the User Login
object.
User login required? Yes/No
If yes, which area of the
NDS tree to navigate to
find the related user object? NDS tree name
Object list “..”
Password required to log
into NDS tree? [Enter data]
Location of print server
object on NDS tree [Navigate the NDS
to the print server]
Password required to attach
to the print server object? [Enter data]
Where should the
Fiery X2-W look for Print
Queues Entire NDS Tree
Specified subtree Restricting the search with
Specified subtree is more efficient.
If the Fiery X2-W has been
set to look at a subtree for
the Print Queue, where
does the subtree begin? [Browse to the root
of the Print Queue
subtree]
HP DesignJet CP Series Printers Appendix-6