HP 2000CP 2500CP - Manual (Page 50)

System Error Codes 2-15 HP DesignJet CP Series Printers
System Error: 010042 0000000X
Problem Description: The status of one of the optical sensors is not
stable when it should be.
Error data (X):
0
³ Problem with the Media Sensor.
1
³ Problem with the Pinch-arm Sensor.
2
³ Problem with the Refill Assembly Sensor.
3
³ Problem with the Elevator Sensor.
4
³ Problem with the Service Station Sensor.
5
³ Problem with the Primer Sensor.
Corrective Action: Try the following:
D Make sure that all sensors are connected
correctly.
D If the error code is related to the Service
Station or the Primer then:
S Make sure that the Service Station
Interconnect Cable (the black cable that
connects the Service Station to the
Electronics Module) is correctly connected
to the Electronics Module.
S Replace the Service Station Interconnect
cable ' Page 8-87.
D If the error code is related to the Refill
Assembly or the Elevator then:
S Make sure that the Refill Interconnect
Cable (the black cable that connects the
Refill Assembly and Elevator to the
Electronics Module) is correctly connected
to the Electronics Module.
S Replace the Refill Interconnect cable '
Page 8-87.
D If the Error is related to the Pinch-arm sensor
then replace the Pinch-arm Sensor
' Page
8-84.
D If the Error is related to the Refill Assembly
Sensor then replace the Refill Assembly
'
Page 8-55.