HP 2000CP 2500CP - Manual (Page 67)

2-32 System Error Codes HP DesignJet CP Series Printers
HP DesignJet 2500CP/3500CP only
System Error: 09xxxx
Problem Description: Hard Disk Drive Error.
Corrective Action: Try the following:
D Switch the printer OFF and ON again.
D If the Error Code appears again then check
that the Hard Disk data cable is correctly
connected at both ends. Also check that the
Hard Disk Power Cable is correctly connected.
D Replace the Hard Disk data cable ' page 8-12.
D If the Error Code continues to appear, then
replace the Hard Disk
' page 8-12.
HP DesignJet 2500CP/3500CP only
System Error: 090004
Problem Description: PostScript installed without the Hard Disk Drive.
Corrective Action: Install the Hard Disk Drive in to the Electronics
Module
' page 8-12.
HP DesignJets 2500CP and 2000CP with firmware version A.02.14
or higher and HP DesignJets 3500CP and 3000CP only
Error Message: Ink System Error XX-YYYY
Ink Delivery System errors are identified by code numbers composed of 2
digits plus 4 additional digits, like this: XX-YYYY. These digits mean:
D XX is the proper code between 01 and 98
D YYYY indicates which ink system is affected. Each Y represents one
color in the order YCMK (as installed in the Carriage) and can be either:
D 0 - if the error DOES NOT apply to that color.
D 1 - if the error DOES apply to that color.
The error codes (XX) are codified following these rules:
D A bigger number means higher severity of the error.