HP 2000CP 2500CP User Manual
Page 65
2-30
System Error Codes
HP DesignJet CP Series Printers
System Error:
060300
Problem Description: Incompatible Firmware and Line Sensor.
Corrective Action:
Upgrade the Firmware.
System Error:
060400
Problem Description: Incompatible Carriage PCA and Line Sensor OR
Line Sensor not calibrated after replacing
Carriage Assembly.
Corrective Action:
Try the following:
D Calibrate the Line Sensor ' page 5-10.
D Replace the Carriage Assembly ' page 8-42.
System Error:
060500
Problem Description: Line Sensor not calibrated.
Corrective Action:
Calibrate the Line Sensor
' page 5-10.
System Error:
07xxxx XXXXXXXX
Problem Description: Firmware Error.
Corrective action:
Make sure you have the latest version of the Flash
SIMM (firmware) installed or upgrade the
firmware revision of the Flash SIMM
' page 1-3.
If the error code remains after installing the latest
Flash SIMM then report the error to the HP
Response Center or the nearest HP Support
Office, stating the following information:
D Model and Serial Number of the printer.
D the complete error number (07xxxx
XXXXXXXX).
D service print (Utilities / Service Tests).
D plot file where the error has occurred.
D additional comments about the usage, the
setting, etc..