Lucent Technologies PortMaster - Manual (Page 184)

Troubleshooting the PortMaster 3
11-16 PortMaster Configuration Guide
Troubleshooting the PortMaster 3
The debug command is useful for troubleshooting the digital modems and Multichassis
PPP events. Output is sent to the system console set by the set console command. After
completing the debugging process, disable the debug commands by using the correct
set debug off command, and reset the console with the reset console command.
Debug information is displayed to the console.
To set debug flags used for troubleshooting, use the following command—entered on
one line:
Command> set debug mdp-status|mdp-events|mcppp-event on|off
Table 11-12 explains the debug options for the PortMaster 3
Table 11-12 Debug Options for the PortMaster 3
Option Description
mdp-status Set on to display the status of the digital modems.
mdp-events Set on to display the progress of the digital modems as they
initialize.
mcppp-event Set on to display all the information related to the Multichassis
PPP events.