Lucent Technologies PortMaster - Manual (Page 194)

ISDN BRI Unnumbered IP Configuration Example
12-10 PortMaster Configuration Guide
2. Configure the following settings for the PortMaster in Denver:
a. Configure global settings (page 12-11).
b. Configure Ethernet interface settings (page 12-12).
c. Configure ISDN port settings (page 12-12).
d. Configure dial-in users (page 12-13).
e. Configure dial-out locations (page 12-14).
3. Configure the following settings for the PortMaster in San Francisco:
a. Configure global settings (page 12-16).
b. Configure Ethernet interface settings (page 12-16).
c. Configure ISDN port settings (page 12-17).
d. Configure dial-in users (page 12-18).
e. Configure dial-out locations (page 12-19).
4. Test the configuration (page 12-20).
5. Troubleshoot the configuration (page 12-21).
Figure 12-2 illustrates the ISDN BRI example in this section using unnumbered
interfaces.
Figure 12-2 ISDN BRI Unnumbered
Internet
PM2 PM2
BRI BRI
PPP 0.0.0.0 PPP 0.0.0.0
Ether0 192.168.200.1/24 Ether0 192.168.100.1/24
11820025
S.F. Denver