Lucent Technologies PortMaster - Manual (Page 93)

Configuring an Asynchronous Port 5-17
Configuring a Port for Network Access
Figure 5-4 Dial-In-Only Port Access
Network Dial-Out-Only Access
Network dial-out-only access can be set on ports dedicated to Internet connections or
connections to another office. In this configuration, the port is used to establish
communication from the PortMaster to an outside location. SLIP or PPP is used for these
types of connections. Figure 5-5 shows an example of a dial-out-only configuration.
PortMaster
11820017
11820017
modems
workstation 2
mobile or at-home user
dial-in connection
workstation 1