Lucent Technologies PortMaster - Manual (Page 357)

Subject Index
Subject Index-5
default routing 3-6
gateway for IP 3-25
gateway for IPX 3-25
host table 3-7
IP address assignment 3-12
name service 3-7
password 3-2
route destinations for IP 3-24
route destinations for IPX 3-25
static routes 3-24
subnet mask table 3-26
system logging 3-9
system name 3-2
Telnet 3-9
ticks 3-26
H
hanging up a line 6-7 , 10-9
hardware flow control 5-4 , 10-2 , 10-8
hardwired connections 16-3
port configuration 16-6
tip for configuring 1-3
high-speed dedicated connections 6-1
high-water mark 8-11 , 8-12
hop count
for IP and IPX gateway routes 3-6
in IP static route 3-25
host device configuration 5-12 , 5-14
host table 3-7 , A-9
HOSTNAME port status 2-6
hostname resolution 3-8
hosts, SNMP 3-22
hotswapping, modems 11-10
I
IDLE port status 2-6
idle timer
asynchronous ports 6-7
dial-out locations 8-10
disabling 7-4
users 7-4
in.pmd 1-1 , 2-5 , 5-13 , 5-14 , 5-18
inband signaling
E & M wink start protocol 11-3
FXS loop start protocol 11-4
initialization steps 2-3
initialization strings 10-4
INITIALIZING port status 2-6
Internet
input filter example 9-10
restrictive filter example 9-13
Internet connections 5-2 , 16-1 , 16-11
IP address pools, static netmasks 3-27
IP addresses
address pools 3-12 , 17-4
class A A-3
class B A-3
class C A-4
class D A-4
class E A-4
classes A-2
conventions A-6
description A-1
destination 5-22 , 7-5 , 8-6
negotiating 5-22 , 6-8
notation A-2
private IP networks A-5
reported 3-13
reserved addresses A-5
setting for Ethernet interface 4-3
subnetting A-7
synchronous ports 6-8
IP traffic, setting on Ethernet interface 4-4
IPX