Lucent Technologies PortMaster - Manual (Page 233)

Using Synchronous V.25bis Connections 14-11
Configuration Steps for a Synchronous V.25bis Connection
Configuring a Dial-Out Location
A location entry on the PortMaster in Miami must be created for the location identified
as boston. This allows the PortMaster router in Miami to call the PortMaster router in
Boston when network traffic is queued. The new location boston should be configured
on the PortMaster in Miami with the values shown in Table 14-10.
Table 14-10 Location Table Values
Parameter Command
Location name add location boston
Type set location boston manual
(Set the location for manual dialing until after the configuration
has been tested. Once the configuration is verified, change the
connection type to on-demand.)
Protocol set location boston ppp
IP destination set location boston destination 192.168.200.1
Netmask set location boston netmask 255.255.255.0
IPX network set location boston ipxnet F3
RIP routing set location boston rip on
MTU set location boston mtu 1500
Idle timer set location boston idle 5
Dial group set location boston group 1
Username set location boston username boston
Telephone
number set location boston telephone 5551212
Password set location boston password anypasswd