Lucent Technologies P550 - Manual (Page 105)

Configuring IPX Routing (Layer 3)
Cajun P550/P220 Switch Operation Guide 4-9
Modifying IPX Static Services
To modify an IPX static service:
1. From the IPX Configuration section of the Web Agent window, click Static
Services. The IPX Static Services dialog box opens.
2. Select the IPX static service to be modified.
3. Use Table 4-5 to complete your configuration changes.
4. Click APPLY to save your changes, or CANCEL to restore previous settings.
Monitoring Switch Performance Using IPX
This section provides detailed statistical information on IPX and the use of IPX on your
switch:
❒ Examining IPX Global Statistics
❒ Searching the IPX Route Table
❒ Examining the IPX Route Table
❒ Examining IPX Route Table Statistics
❒ Searching the IPX Service Table
❒ Examining the IPX Service Table
❒ Examining IPX Service Table Statistics
Examining IPX Global Statistics
All statistics only count IPX packets which are received by or sent from the Supervisor
module, not those packets routed in hardware.
To display the global IPX routing statistics:
1. In the IPX Display section of the Web Agent window, click Global Statistics. The
IPX Routing Global Statistics dialog box opens.
2. To view or remove statistics, perform one of the following steps:
• If you want to see the latest statistics available, click REFRESH to update all
statistics.
• If you want to reset all statistics currently displayed, click CLEAR to reset all
statistics to zero.