Lucent Technologies P550 - Manual (Page 108)

Configuring IPX Routing (Layer 3)
4-12 Cajun P550/P220 Switch Operation Guide
Examining IPX Route Table Statistics
To examine your IPX route table statistics:
1. In the IPX Display section of the Web Agent window, click Route Table
Statistics. The IPX Routing Table Statistics dialog box opens.
2. Use Table 4-9 to review each statistic:
Searching the IPX Service Table
To search the IPX service table:
1. In the IPX Display section of the Web Agent window, click Service Table
Search. The IPX Service Table Search dialog box opens.
2. Select the search criteria you want to use to find information on specific services.
For example, if you want to find all static services that are presently configured on
your switch, search by
source and specify static as your search value.
Ticks Amount of time (in ticks) that the packet takes to reach the
network number you specified. A tick is approximately 1/18th of a
second.
Hops Number of routers (hops) that the packet must pass through before
reaching the network number associated with the IPX network.
Next-Hop MAC
Address MAC address of the next destination through which the network is
reached.
Table 4-9. IPX Route Table Statistics
Statistic Definition
Current Number of
Routes Indicates the current number of IPX routes.
Peak Number of
Routes Lists the peak number of routes.
Route Add Failures Indicates the number of failed attempts to add a
route to the routing table.
Table 4-8. IPX Route Table Parameters (Continued)
Parameter Defines the...