Lucent Technologies P550 - Manual (Page 255)

Managing Intelligent Multicasting (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 15 -9
Table 15-5. Multicast Session Client Port Parameters
4. Click DELETE to remove your selected multicast session client port, or CANCEL
to restore previous settings.
Note: Static (Mgmt) client ports can only be removed through the Static Sessions
dialog box.
Creating a Static Multicast Session
To create a new static multicast session:
1. In the Intelligent Multicasting section of the Web Agent window, click Static
Sessions. The Static Multicast Sessions dialog box opens.
Note: You must enable intelligent multicasting on a global basis to make your static
multicast session active. See “Configuring Global Intelligent Multicasting”,
earlier in this chapter.
2. Click Create New Session to create a new static multicast session. The Static
Multicast Session Configuration dialog box opens.
Parameter Definition
Select Select the multicast session client port.
Port Displays the client port number.
Application Displays the application(s) associated with this client port.
Applications include:
• Mgmt
• IGMP
• LGMP
• CGMP