Lucent Technologies P550 - Manual (Page 119)

Cajun P550/P220 Switch Operation Guide 6 -1
6
Configuring IPX SAP Protocol
(Layer 3)
Overview
This chapter and its procedures are specific to Layer 3 configuration.
Included in this chapter:
❒ Configuring IPX SAP Interfaces
❒ Creating IPX SAP Filters
❒ Interpreting IPX SAP Interface Statistics
Configuring IPX SAP Interfaces
To configure the IPX SAP interfaces:
1. In the IPX SAP Configuration section of the Web Agent window, click
Interfaces. The IPX SAP Interfaces dialog box opens.
2. Use Table 6-1 to configure the IPX SAP interfaces:
Table 6-1. IPX SAP Interface Parameters
Parameter Allows you to...
Select Select a SAp interface to modify.
Interface Identify the IPX interface associated with the SAP interface.
Network Number Identify the number of the IPX network associated with the
interface.
Use Interpacket Gap Select whether or not SAP updates sent out over an interface
have an interpacket transmission delay.
• If enabled, IPX SAP provides update packets.
• If disabled, IPX SAP periodic update packets have no
interpacket gap.