Lucent Technologies P550 - Manual (Page 151)

Configuring IP Routing (Layer 3)
Cajun P550/P220 Switch Operation Guide 7-25
Searching the IP Routing Table
To use the IP routing table:
1. In the IP Display section of the Web Agent window, click Route Table Search.
The Route Table Search dialog box opens.
2. Select the search criteria you want to use to find more specific information on
available routes. For example, if you want to find all static routes that are presently
configured on your switch, search by source and specify static as your search value.
3. Use Table 7-12 to determine your search parameters:
4. Click SEARCH to start the search. If routes are available, they are displayed in the
IP Routing Table dialog box.
BOOTP/DHCP Out Requests Total number of BOOTP/DHCP requests forwarded by the
BOOTP/DHCP Relay Agent.
BOOTP/DHCP Out Responses Total number of BOOTP/DHCP responses forwarded by the
BOOTP/DHCP Relay Agent.
Table 7-12. IP Route Table Search Parameters
Parameter Allows you to perform a search...
Source Of your IP routing table using one of the following
parameters:
• RIP
• OSPF
• Static
• Local
Once you select one of these parameters, the search
attempts to find routes associated the parameter you
chose.
Interface Based on the interface you select. System default
entries include:
• Default
• Discard
• Ethernet Console
• Configured Interface
IP Address Based on an IP address you specify.
Table 7-11. IP Routing Global Statistics (Continued)
Statistic Defines the...