Lucent Technologies P550 - Manual (Page 275)

Monitoring the Cajun Switch (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 16-9
5. Click APPLY to save your changes, or CANCEL to restore previous settings.
Configuring Event Notification
To configure event notification:
1. In the Event Subsystem section of the Web Agent window, click Event
Configuration. The Event Management dialog box opens.
2. In the ID column, click event type. The delivery of event information is enabled
when this type of event occurs.
3. Use Table 16-8 to configure Event Table actions. If no events are selected, no action
will be taken when an event of this event class occurs.
4. Click APPLY to save your changes, or CANCEL to restore previous settings.
OSPF For OSPF events if OSPF protocol event logging is
enabled.
RIP For RIP events if RIP protocol event logging is enabled.
LDAP For LDAP events if LDAP protocol event logging is
enabled.
AppleTalk For AppleTalk events if AppleTalk protocol event logging
is enabled.
Table 16-8. Event Table Actions
Setting... Determines...
Log Event entry entered in event and shutdown
logs.
Trap SNMP trap message (event notification) sent
to designated trap receivers.
Console Displays the event information to the
console serial port connected at the switch
front panel.
Table 16-7. Event Table (Continued)
Class
Determines whether or not the switch sends
a notification...