Lucent Technologies P550 - Manual (Page 162)

Configuring IP Routing (Layer 3)
7-36 Cajun P550/P220 Switch Operation Guide
2. Use Table 7-22 to review the DVMRP Routing Statistics information:
Displaying the DVMRP Route Table
The DVMRP route table contains information on valid DVMRP routes, the expiry for
those routes, and additional next-hop information.
To view the DVMRP route table:
1. In the DVMRP Display section of the Web Agent window, click Route Table.
The DVMRP Route Table dialog box opens.
2. Complete one of the following to modify your DVMRP table:
• Select the entry and click Delete Entry to delete one or more entries.
• Click Flush Table to clear the entire table.
• Click REFRESH to receive the most up-to-date information on the entries in
the table.
3. Use Table 7-23 to review the DVMRP route table parameters:
Table 7-22. DVMRP Routing Statistical Parameters
Parameter Defines the...
Current Number of
Routes Total number of routes present in the routing database. This
number includes both valid and invalid routes.
Number of Triggered
Routes Total number of routes added to the routing table that were
triggered by a topology change in the network.
Number of Valid Routes Total number of valid routes present in the routing database.
Table 7-23. DVMRP Route Table Parameters
Parameter Defines the...
Source Network Network from which a multicast flow may originate.
Source Network Mask Source network mask.
Reporting Router IP address of the router reporting this route to its neighbors.
Reporting Router
Interface IP interface configured, which leads to the upstream neighbor
(DVMRP router).
Route Metric Router’s cost to source network.
Expiration Period in (sec) Time (in seconds) remaining before the source network is
removed from the DVMRP routing table.