Lucent Technologies P550 User Manual
Page 95
Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide
3
-49
3. From the Copy Source pull-down menu, select one of the following:
•
Running-Config - To copy your running configuration to your startup
configuration, to a file located on the switch, or to a file located on a TFTP
server.
•
Startup-Config - To copy your startup configuration to your running
configuration, to a file located on the switch, or to a file located on a TFTP
server.
•
File - To copy a file stored on the switch to your running or startup
configuration, to a location on the switch, or to a location on a TFTP server.
•
TFTP Server - To copy a file stored on a TFTP server to your running or startup
configuration or to a file on the switch.
If you select
File or TFTP Server, also provide the path and filename of the source
file in the
Source Filename field.
4. From the Copy Destination pull-down menu, select one of the following:
•
Running-Config - If you are copying your startup configuration, or other file
located on the switch or on a TFTP server, to your running configuration.
•
Startup-Config - If you are copying your running configuration, or other file
located on the switch or on a TFTP server, to your startup configuration.
•
File - If you are copying your startup or running configuration, another file
located on the switch, or a file located on a TFTP server to a file on the switch.
•
TFTP Server - If you are copying your startup or running configuration, or
another file located on the switch, to a location on a TFTP server.
If you select
File or TFTP Server, also provide the path and filename of the
destination file in the
Source Destination field.
5. In TFTP Server IP Address, enter the IP address of the source or destination TFTP
server, if applicable.
6. Click Copy. Your source configuration or file is copied to your specified
destination.
Note: The Web Agent returns an
Invalid operation!
error message if you
attempt to copy:
•
The current running configuration to the running configuration.
•
The startup configuration to the same startup configuration.
•
The specified TFTP server to a TFTP server.