Lucent Technologies P550 - Manual (Page 252)

Managing Intelligent Multicasting (Layer 2 & Layer 3)
15 -6 Cajun P550/P220 Switch Operation Guide
Displaying Router Ports
To display router ports:
1. In the Intelligent Multicasting section of the Web Agent window, click Global
Configuration. The Intelligent Multicast Global Configuration dialog box opens.
Note: You must enable intelligent multicasting on a global basis to make your router
ports active. See “Configuring Global Intelligent Multicasting”, earlier in this
chapter.
2. Click Display/Configure Router Ports. The Router Port Display/Configuration
dialog box opens.
3. Use Table 15-2 for more information on router ports.
Table 15-2. Router Port Display Parameters
4. Select a router port and click DELETE to remove a router port, or CANCEL to
restore previous settings.
Configuring Static Router Ports
To configure a static router port:
1. In the Intelligent Multicasting section of the Web Agent window, click Global
Configuration. The Intelligent Multicast Global Configuration dialog box opens.
Note: You must enable intelligent multicasting on a global basis to make your static
router port configuration active. See “Configuring Global Intelligent
Multicasting”, earlier in this chapter.
Parameter Definition
Port Displays the router port in the multicast session.
VLAN Displays the port VLAN of the router.
Application Displays the active applications of the router port.
Applications include:
• Mgmt (Static)
• IGMP
• LGMP
• CGMP