Lucent Technologies P550 - Manual (Page 221)

Monitoring and Configuring the Forwarding Cache (Layer 3)
Cajun P550/P220 Switch Operation Guide 11 -5
3. Use Table 11-4 to determine the parameters you use in your search:
Displaying the Forwarding Cache
To display the forwarding cache information:
1. In the L3 Forwarding Cache section of the Web Agent window, click
Forwarding Cache. The FE Cache dialog box opens.
2. To modify your FE Cache table, perform one of the following:
• To delete one or more entries, select the entry and click Flush Entry.
• To flush (clear) the entire table, click Flush Table.
• To refresh the contents of the table, click REFRESH.
Table 11-4. Route Cache Entry Search Parameters
Parameter Allows you to search for all entries...
Destination Address Within the routing cache that match the specified destination
address (IP address).
Source Address Within the routing cache that match the specified source
address (IP address).
Protocol By protocol identifier. By default, this field is 0 for IP (for
example, not supported by IP).
Destination Port Within the routing cache that match the specified destination
port (IPU, IPM, IPX).
Source Port Within the routing cache that match the specified source port
(IPU, IPM, IPX).
Comparison Value Within the routing cache that match the specified comparison
value (TCP/UDP). Values include:
• DA - Destination address
• DASA - Destination and source address
• DAPROT - Destination address and protocol
• DADP - Destination address and destination port number
• DASAPROT - Destination and source address and
protocol
• DASADPSP - Destination and source address, and the
corresponding destination and source port numbers
VLAN Within the routing cache that match the specified VLAN name.
Rule Number Within the routing cache that matches the specified rule
number associated with an access list.
PRE That match the PRE that is associated with the fabric port ID.