Lucent Technologies P550 - Manual (Page 94)

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
3 -48 Cajun P550/P220 Switch Operation Guide
2. Use Table 3-22 for information about copying a source file to a TFTP server
destination:
Table 3-22. Configuration File Management Parameters
Parameter Description Options
Save Running-Config
to Startup-Config Saves the running
configuration to the
startup configuration N/A
Copy Source Specifies the source file to
be copied • Unspecified - Specifies an initialized
value.
• File - Specifies a source file located on the
switch in NVRAM.
• Running-Config - Specifies a running
configuration.
• Startup-Config - Specifies a startup
configuration.
• TFTP Server - Specifies a source file
located in a directory on a TFTP server.
Source Filename Specifies the path and
name of the source file Source files can be ASCII files in NVRAM
available for upload or files located on a TFTP
server available for download
Copy Destination Specifies the destination
of the file to be copied • Unspecified- Specifies an initialized
value.
• File - Specifies that a source is copied or
downloaded to NVRAM.
• Running-Config - Specifies that a source
is copied to the running configuration.
• Startup-Config - Specifies that a source is
copied to the startup configuration.
• TFTP Server - Specifies that a source is
copied to a TFTP server location.
Destination Filename Specifies the location of
the destination Configuration files and other files can be
copied to NVRAM on the switch or to a TFTP
server as a destination location.
TFTP Server IP Address Specifies the IP address of
a source or destination
TFTP server
Copy (download) source files, located on a
TFTP server, to your running configuration,
your startup configuration, or a location on
the switch. Or, copy (upload) your
configuration files, or a file located on the
switch, to a TFTP server.