Lucent Technologies P550 - Manual (Page 59)

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 3 -13
Viewing Switch Port Parameters
To view switch port parameters:
1. In the System Configuration section of the Web Agent window, select Modules
& Ports. The Module Information dialog box opens.
2. In the Switch Ports column, click the number for switch port information about
the desired module. The Switch Ports dialog box opens.
3. Use Table 3-6 for more information on switch port parameters:
4. Click one of the following for more information on switch ports:
• Next/Previous Module - to view the next or previous module’s switch port
parameters.
• Modules - to return to the Module Information dialog box.
• All Module Switch Ports Configuration - to open the Switch Port
Configuration All Ports dialog box and configure all ports for the selected
module.
Configuring Switch Port Parameters
Switch port parameters set how each port performs switching functions (for example,
VLAN parameters, hunt group assignments, trunk mode, and frame tag scheme). Refer
to Table 3-7 for more information on individual switch port configuration parameters.
Table 3-6. Switch Port Parameters
Parameter Definition
Links Opens associated dialog boxes.
Port Displays the port associated with the selected module.
Name Displays the port name and opens the Switch Port
Configuration dialog box for the selected module.
Port VLAN Displays the port VLAN for the selected module.
VLAN Classification Displays the port VLAN classification for the selected
module.
Trunk Mode Displays the port’s trunk mode for the selected module.
Hunt Group Displays the hunt group of which the port is a member for
the selected module.
STAP Mode Displays whether the spanning tree algorithm protocol is
enabled or disabled for the selected module.
MAC Address Displays the port’s MAC address for the selected module.