Lucent Technologies P550 - Manual (Page 81)

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 3 -35
2. In Clock Options, click Summer Time Hours Algorithm. The Summer Time
Hours Configuration box opens.
3. From the Enable State pull-down menu, select Enable.
4. In the Offset cell of the Value column, enter the reset value for the clock in
minutes.
For example, if you intend to reset the clock forward or backward by one hour,
retain the default value of 60 minutes.
5. Click Recurring.
Note: The Web Agent enables you to select the boxes next to both Recurring and
One-time Summer Time Hours. However, the option to set both Recurring
and One-time hours is not provided.
6. Use Table 3-19 for information about configuring Summer Time Hours.
Table 3-19. Recurring Summer Time Hours Configuration
Parameter Definition
Recurring Select if Summer Time Hours is defined by a rule such as
Daylight Savings Time (DST). All Start and End fields
associated with Recurring Summer Time Hours provide the
default values for Daylight Savings Time.
When you select recurring Summer Time Hours, you
indicate the time, in hours and minutes, on a specified day,
week, and month that Summer Time Hours begin and end.
Start Specifies the start of Summer Time Hours.
End Specifies the end of Summer Time Hours.
Week Select the week during which you want recurring Summer
Time Hours to start or end. The selected week should
reflect the day on which Summer Time Hours start. For
example, if Summer Time Hours start on the first Sunday
in April, select the First week. Options include:
• First - First week of the month, the default Start value,
when Daylight Savings Time starts in the Western
hemisphere.
• Second - Second week of the month.
• Third - Third week of the month.
• Fourth - Fourth week of the month.
• Last - Remaining days of the month that form the last
week of the month. Last is specified as the default End
value, denoting when Daylight Savings Time ends in
the Western hemisphere.