Lucent Technologies P550 - Manual (Page 208)

Configuring AppleTalk Routing (Layer 3)
10 -10 Cajun P550/P220 Switch Operation Guide
3. Use Table 10-4 to configure your zone filter.
4. Click CREATE to add the new zone filter, or CANCEL to restore previous settings.
Editing an AppleTalk Zone Filter
To edit an AppleTalk zone filter:
1. In the AppleTalk Configuration section of the Web Agent window, click Zone
Filter. The AppleTalk Zone Filter dialog box opens.
2. Click the Select for the AppleTalk zone filter to be edited.
3. Use Table 10-4 to edit your zone filter.
4. Click...
CREATE to add a new zone filter. The Add AppleTalk Zone Filter dialog box opens.
See “Creating an AppleTalk Zone Filter”, earlier in this section, for more
information.
DELETE to remove the selected zone filter.
CANCEL to restore previous settings.
Edit If to add or delete this zone filter to/from an interface. The Add/Delete
Interface to Zone Filter dialog box opens. See “Adding or Deleting Interfaces to
Zone Filter”, later in this section, for more information.
Table 10-4. AppleTalk Zone Filter Parameters
Parameter Definition
Access List Enter the access list number to be associated with the zone
filter. Valid values are 632-663.
Name Enter the name of the zone to be filtered. You can also
leave this field blank for wildcarding.
Type Select the type of filtering.
Options include:
• Deny
• Permit
Interface Select the interface to apply this filter to.