Lucent Technologies P550 - Manual (Page 212)

Configuring AppleTalk Routing (Layer 3)
10 -14 Cajun P550/P220 Switch Operation Guide
Viewing the AppleTalk Route Table
To view the AppleTalk route table:
1. In the AppleTalk Display section of the Web Agent window, click Route Table.
The AppleTalk Route Table opens.
2. Use Table 10-7 for more information on route table statistics.
Seed Displays whether the AppleTalk interface seeded the
network.
State Displays the state of the AppleTalk interface.
Options include:
• Up - indicates that the AppleTalk interface is active.
• Down - indicates that the AppleTalk interface is
inactive.
Table 10-7. AppleTalk Route Table Parameters
Parameter Definition
Select Select the entry to be acted upon.
Network Range Displays the network range.
Metric Displays the AppleTalk metric for the network range.
State Displays the state of the entry.
Options include:
• Good
• Suspect
• Going Bad
• Bad
Owner Displays the AppleTalk component responsible for the
addition of the route.
Options include:
• Local
• Static
• RTMP
Next Hop Displays the next hop address where forwarded packets are
routed.
Table 10-6. AppleTalk Interface Statistics Table Parameters (Continued)
Parameter Definition