Lucent Technologies P550 - Manual (Page 78)

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
3 -32 Cajun P550/P220 Switch Operation Guide
To configure the switch as a LAN router:
1. Create a IP interface for each subnet. Refer to “Creating and Implementing
VLANs”, in Chapter 12.
2. Create or assign a VLAN to the IP interface. Refer to “Assigning IP Interfaces to the
VLAN”, in Chapter 7.
3. Bind ports to the VLANs assigned to the IP interfaces. Refer to “Viewing Switch
Port Parameters”, earlier in this chapter.
4. Assign an IP address and subnet mask to the VLAN. Refer to “Assigning IP
Interfaces to the VLAN”, in Chapter 7.
5. Specify how the router will communicate with other routers. Refer to “Assigning IP
Interfaces to the VLAN”, in Chapter 7, to configure OSPF and RIP parameters.
Configuring System Information
The System Information section of the Web Agent allows you to configure general
system information and settings, such as:
❒ Entering General System Information
❒ Enabling SNTP
❒ Setting Summer Time Hours
❒ Displaying the Power System Statistics
❒ Displaying Cooling System Statistics
❒ Configuring Redundant Hardware
❒ Performing a System Reset
❒ Viewing Your Running Configuration
❒ Viewing Your Startup Configuration
❒ Viewing Your Script Execution Log File
❒ Copying Configuration Files
❒ Copying Files