Lincoln Electric VRTEXTM 360 SVM200-A - Manual (Page 139)

DISPLAY
BOARD
3/8”
SCREWS
CONTROL
PANEL
FIGURE F.37 – DISPLAY LED BOARD LOCATION
DISPLAY BOARD
REMOVAL AND REPLACEMENT PROCEDURE (continued)
REMOVAL PROCEDURE
1. Remove input power.
2. Using the 3/8” wrench, remove the two screws
from the top of the control panel. See Figure
F.37.
3. Carefully lower the control panel.
4. Locate the Display Board. See Figure F.37.
5. Remove plug J37 from the display board. See
Figure F.38.
6. Carefully remove the Display Board from the
three mounting stand-offs.
TROUBLESHOOTING AND REPAIR F-82 F-82
VRTEX TM 360
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Master
TOC
Return
to
Master
TOC
Return
to
Master
TOC
Return
to
Master
TOC