Lincoln Electric VRTEXTM 360 SVM200-A - Manual (Page 49)

MAINTENANCE D-2 D-2
VRTEX TM 360
CLEANING & MAINTENANCE
FMD
Taking proper care of the FMD (Face Mounted Display)
is important for optimal functioning of the equipment.
Occasionally, the FMD lens should be wiped with the
lint free lens wipe that is provided. This can be done
to remove fingerprints from the lenses. You can also
use a lens cloth (e.g., from a camera shop). Paper
towels or household cloths may scratch or damage the
lenses and should not be used. Avoid exposing the
FMD to liquids. Cleaning solutions should not be used
to clean the FMD. Do not use Isopropyl alcohol or solu-
tions containing alcohol to clean the lenses or plastic
parts on the FMD. You can also use a camera pres-
sure canister to occasionally blow out dirt.
You may want to clean the inside of the helmet occa-
sionally. Be sure to do so without exposing the FMD to
any unacceptable materials, as explained above.
The FMD should be kept in a clean and dry location out
of direct sunlight. Avoid dirty or sandy environments,
as these can lead to scratching of optics and damage
the FMD mechanical adjustments.
Monitor
The monitor is not a touch screen and can be dam-
aged by touching or poking it with any object. Use
care when cleaning screen. Use only a soft dry
cloth (cotton or flannel). Avoid chemicals and sol-
vents (alcohol, benzine, acidic or alcazine solvent
cleaners). Avoid granular or abrasive cleaning
agents.
CAUTION
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Master
TOC
Return
to
Master
TOC
Return
to
Master
TOC
Return
to
Master
TOC