Lincoln Electric VRTEXTM 360 SVM200-A - Manual (Page 98)

Mounting
Screws (4)
Lock Washer
Washer
Pedestal
FIGURE F.14 – PEDESTAL MOUNTING BOLTS
MONITOR AND PEDESTAL REMOVAL AND REPLACEMENT PROCEDURE
(continued)
REPLACEMENT PROCEDURE
1. Install pedestal and secure using previously
removed mounting screws and associated
washers.
2. Loosely install previously removed top two
screws into the new monitor.
3. Slide monitor onto pedestal and install bottom
two screws previously removed.
4. Tighten all four phillips screws securing monitor.
5. Connect power supply cord and VGA cable pre-
viously removed. See Figure F.13.
6. See Retest After Repair.
TROUBLESHOOTING AND REPAIR F-41 F-41
VRTEX TM 360
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Section
TOC
Return
to
Master
TOC
Return
to
Master
TOC
Return
to
Master
TOC
Return
to
Master
TOC