Operation, Welder’s view screen, Instructor’s view screen – Lincoln Electric VRTEXTM 360 SVM200-A User Manual
Page 33
OPERATION
B-15
B-15
VRTEX
TM
360
The Arc Length cue is similar to the CTWD cue but
represents arc length distance for the VR SMAW
process. The goal is to get the tip of the arrow on the
line and keep the arrow color Green.
The Travel/Work Angles can be used with the SMAW,
GMAW or FCAW processes. The goal of this cue is to
center the circle in the cross hair and keep the color
green.
New Coupon
Pressing the blue new coupon menu button instantly
replaces the current coupon with a fresh, unwelded
coupon. Note that this is a quick way to start over on
the same configuration and process but that it will
remove all passes from the coupon and the graphs on
the LASER screen.
White Screen Select Arrows
Used to rotate through the LASER screen, instructorʼs
view and welderʼs view.
Welder’s View screen
Overview
This screen shows the virtual view as seen by the user
wearing the helmet.
Instructor’s View screen
Overview
This screen shows the coupon and virtual weld in real
time. An observer can rotate and/or zoom in or out on
the coupon in real time. This view also shows the VR
GMAW/FCAW gun or VR SMAW device being used.
Move the joystick to rotate the coupon. Press the red
select button to toggle the joystick from rotate to zoom.
NOTE: Changing views on the monitor does not
change the user’s view in the helmet.
INSTRUCTORS VIEW (POOR WELD)
CTWD (Contact To Work Distance)
TRAVEL/WORK ANGLE