Toshiba LF516 - Manual (Page 100)

99
6 F 8 A 0 9 3 4
8.2.28 Switch Position Setting
The switch position of the converter display can be set.
The position setting of the switch enables the display remains the same in orientation, regardless of
which direction relative to the piping the converter is installed.
You can set the switch position by selecting one from four positions described below.
(1) Switch position: TOP
The infrared switches are located at the top with the front facing you.
(2) Switch position: BOTTOM (Standard)
The infrared switches are located at the bottom with the front facing you.
(3) Switch position: LEFT
The infrared switches are located at left with the front facing you.
(4) Switch position : RIGHT
The infrared switches are located at right with the front facing you.
Infrared switches
Infrared switches
Infrared switches
Infrared switches