Toshiba LF516 - Manual (Page 47)

46
6 F 8 A 0 9 3 4
○ Operation timeout function
If no operation is made for one minute or more while the converter is in the setting mode, the
mode automatically returns to the measurement mode unless the parameters are displayed on
the screen.
Menu screen
When no operation is made
for 1 minute, the mode
automatically returns to the
measurement mode.
Parameter check screen
Parameter change screen
(Parameters are being
changed.)
The screen does not return
to the measurement mode.
7.3.2 Setting and Calibration
In the setting mode, you can select items, or check or change the setting values as described below.
When you push or to scroll up or down the numeric value or alphabet, or when push
to move the digit, you can execute continuous operation by holding down the relevant
switch longer. (Holding down the switch longer automatically executes the operation continuously.)
● Moving to the menu screen
Switch operation Display example Description
Mode change screen
Pushing in the measurement mode
takes you to the menu configuration
selection screen.
For configuration, select BASIC or
DETAILED
menu.