Toshiba LF516 - Manual (Page 19)

18
6 F 8 A 0 9 3 4
(2) Preventing an Empty Pipe Condition
Fix the relevant pipes installed on both sides of the detector by attach fittings, etc. to support the pipe.
By supporting the pipes, not only the pipe vibration is reduced but also the damage to the pipes by the
electromagnetic flowmeter's weight and the fluid mass (see Figures 4.2 and 4.3).
Figure 4.2 Example of Pipe Fixing Procedure
Figure 4.3 Model Diagram of Unsupported Pipes
Pipe support fittings
Pipe support fittings