Toshiba LF516 - Manual (Page 111)

110
6 F 8 A 0 9 3 4
Totalizer Operation
●Operation using the operation switches
You can start, stop or clear the totalizer as described below.
Switch operation Display example Description
Mode change screen
When you push in the measurement
mode, the screen moves to the totalizer
control screen.
Totalized flow count (both directions)
appears automatically on this screen.
In addition, the switches
( are shown.)
* is displayed while the totalizer is in operation and is displayed when it
is stopped.
* If an erroneous password is input when password is asked, or if it is a sealed
specification, is not displayed.
When you push , the totalizer starts
counting and appears on the screen. In
addition, changes to .
When you push and hold longer, a
confirmation message appears.
Pushing clears the totalizer and
pushing cancels the clear operation.
Pushing at the end returns you to the
measurement mode.