Toshiba LF516 - Manual (Page 74)

73
6 F 8 A 0 9 3 4
● Changing the rate-of-change limit
The following is an example to change the rate-of-change limit value from 10.0% to 15.0%.
Switch operation Display example Description
Select "LIM RATE" from the setting item
selection menu.
The currently set value (10.0% in this
example) appears.
Then push .
The switches at the bottom change.
( are shown.)
At the same time, the cursor appears.
Push to move the cursor to the
desired digit and push to change the
number of the digit.
When you push , a message appears
to confirm whether the setting is OK or not.
If OK, push . If you want to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.
Note : If you try to set a value exceeding 30.0%, HIGH OVER SPEC error appears and the
value returns to the previous value. Set a value again.