GE Industrial Solutions GE Zenith Series DPB - Manual (Page 12)

4 Installation & Operation Manual, GE Series DPB Busway
March 25, 2013, Rev 0 GE Confidential
Series DPB Busway Installation & Operation Manual
RECEIVING, HANDLING, & STORAGE
WARNING
HAZARD OF ELECTRIC SHOCK, BURN, OR EXPLOSION
Protect this equipment from containments such as water, salt, concrete dust and other corrosive
environments before and during installation.
Equipment and packing are not weather resistant and shall not be stored outside or exposed to
the environment
Do not sit, walk or stand on this equipment.
Failure to follow these instructions may result in equipment damage, serious
injury or death.
RECEIVING
Upon receipt, check the packing list against the equipment received to ensure the order and shipment are
complete. Claims for shortages or other errors must be made in writing to GE Corp within 30 days after the
receipt of your shipment.
Upon receipt, inspect the busway packaging components and sections for any damage that may have
occurred during shipping. If damage is found, immediately make a claim with the carrier and notify
GE Critical Power.
HANDLING
Cut the banding that secures the package with band cutters.
Exercise care when unpacking.
Handle these products with care, avoid damage to the components, do not drop, bend, pierce or mishandle in
any manner the system as this may lead to a faulty installation
Avoid denting or mishandling that may cause damage. Ensure the handling personnel and equipment at the
job site is adequate for handling the busway.
Use the correct tools to remove the packing at each busway end. Take care not to damage the housing,
which could result in a failure of the busway. Avoid using objects with sharp edges to lift the busway.
Most packaging is recyclable dispose of all packing appropriately.
STORAGE
If the busway is not installed and energized immediately, store the busway in its original packaging in a clean,
dry space.
Busway should not be stored outdoors.
Busway should not be stored in a moist environment.
Protect against moisture.