GE Industrial Solutions GE Zenith Series DPB User Manual
Page 27
19
Installation & Operation Manual, GE Series DPB Busway
March 25, 2013, Rev 0
GE Confidential
Series DPB Busway Installation & Operation Manual
11.) Each Dowel Pin has an O-ring set into a small groove on the insertion end of the dowel pin.
(See Figure 15.2).
12.) Position the Dowel Pin into the round port between the first pair (viewed left-to-right, or right-to-left) of
installed white-tipped, slotted Cam Spacers. The conical pointed end is inserted first, and the end with
the O-ring inserted last. (See Figure 15.3)
13.) Using pressure push the Dowel Pin so that it is inserted completely into the Cam Actuator Tool Hole.
(See Figure 15.4)
Figure 15.3 - Positioning of Dowel Pins
Figure 15.4 - Insertion of Dowel Pin
Figure 15.2 - Dowel Pin
O-Ring