GE Industrial Solutions GE Zenith Series DPB - Manual (Page 46)

38 Installation & Operation Manual, GE Series DPB Busway
March 25, 2013, Rev 0 GE Confidential
Series DPB Busway Installation & Operation Manual
INPUT PM PCB
Input Power Monitor (PM) Board: (Figure 33):
this board monitors two separate 3- phase
power sources including voltage, phase
current and neutral, and ground current as
well as four contact alarm inputs.
J2 Voltage
Configuration
J5 Voltage
Configuration
J11 Input
Current 2
(A, B, C)
J3 CanBUS
Modbus Power
J7 External
Contacts
J10 Input
Current 1
(A, B, C)
J13 Input
Current 2
(N, G)
J12 Input
Current 2
(N, G)
Figure 33 - Input PM Board
Option 2 - END FEED MONITORING ONLY