Bcms setup documentation – GE Industrial Solutions GE Zenith Series DPB User Manual
Page 55
47
Installation & Operation Manual, GE Series DPB Busway
March 25, 2013, Rev 0
GE Confidential
Series DPB Busway Installation & Operation Manual
BCMS SETUP DOCUMENTATION
REQUIRED MATERIAL
1�
USB cable (Male A to Male B)
2�
Accumulator_Setup�exe application
3�
FTDI Drivers for USB (www�ftdichip�com)
4�
Microsoft DotNet (www�microsoft�com/net)
STARTUP
Connect the USB cable to the Accumulator PCB� Wait for it to connect, and then open the Accumulator_Setup�exe file�
You should get a screen that looks similar to Figure 44�
Note: you will not have the same devices listed in the main part of the screen�
If you do not see “USB <-> Accumulator” in the top box, This means you have not connected� Press the “Search” button�
If the name appears press the “Open” button� If not, you need to make sure you have the FTDI drivers installed�
If you get any DLL error, Make sure you have Microsoft DotNet installed�
Figure 44 - BCMS Setup Startup Screen