GE Industrial Solutions AF-600 FP Fan and Pump Drive (460V_575V 150HP and above) - Manual (Page 29)

3.1.18 Electrical Installation, Control Terminals
To connect the cable to the terminal:
1. Strip insulation by about 9-10 mm
2. Insert a screwdriver 1) in the square hole.
3. Insert the cable in the adjacent circular hole.
4. Remove the screwdriver. The cable is now mounted in the terminal.
To remove the cable from the terminal:
1. Insert a screw driver 1) in the square hole.
2. Pull out the cable.
1) Max. 0.4 x 2.5 mm
1.
2.
3.
AF-600 FP High Power Operating Instructions
28
3