Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 112)

Micro-PWC OPERATOR’S MANUAL
98 Events
Enter the desired starting time in the indicated format. Note that the 24 hour clock is used, and the month
is identified by the first three letters of the month name. Click OK to complete the operation.
Similarly, the second item on this window is the End Time button. The time and date displayed on the face
of this button indicate the latest time and date allowed on messages to be included in the Event Log. The
default End Time is the current time and date.
The third item on this window is the Device button. It is used to configure the print device to which the log
is to be sent. The face of the button displays the print device name, or the word Device if no print device
has been selected. Click this button to configure the print device to which the log is to be printed. The
Printer Selection window (
Figure 9-8 ) will be displayed. Highlight the desired printer by clicking on it, then
click OK to complete the selection operation.
The fourth item in the Print Event Log window is a button labelled Print Banner. The face of the associated
button displays Yes if a banner is to be printed, or No if the banner is to be omitted. Click this button to tog-
gle from one state to the other. Click OK to complete the log printing operation.
TC00241A
Figure 9-8. Printer Selection Window