Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 67)

Micro-PWC OPERATOR’S MANUAL
Logs 53
5.2 Event Logs
Event logs are used to obtain information about events which occurred in the Historical Database within a
specified time span. To select event logs for printing, click the Event Logs radio button, located at the top of
the Log Print window.
5.2.1 Print Event Logs
The Print button on the Log Print window allows the user to print event logs on demand. First select the
desired log from the list box by clicking on it; it will be highlighted. Next, click Print to display the Print Log
window (
Figure 5-2 ).
The name of the Event Log appears first in the window, followed by the Start Time button. The time and
date displayed on the face of this button indicate the earliest time and date to be used for messages
included in the Event Log. The default starting time is 19:00:00 31-DEC-69; to change this, click the button.
A pop-up window appears, containing an entry box and the prompt:
Enter Start Time (HH:MM:SS DD-MMM-YY):
Enter the desired starting time in the indicated format. Note that the 24 hour clock is used, and the month
is identified by the first three letters of the month name. Click OK to complete the operation.
Similarly, the second item on this window is the End Time button. The time and date displayed on the face
of this button indicate the latest time and date allowed on messages to be included in the Event Log. The
default End Time is the current time and date.
The third item on this window is the Device button. If a device has been selected, the name of the device
is displayed to the right of the Device button. Click this button to display the Printer Selection window.
Highlight the desired printer by clicking it, then click OK to complete the selection operation.
TC00210A
Figure 5-2. Print Log Window (Event Logs)