Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 160)

Micro-PWC OPERATOR’S MANUAL
146 Utilities
If only a portion of the path name for a file is known, click Find. A Find window ( Figure 11-43 ) will be dis-
played. Select the radio button to choose the list to be searched (Not Selected For Restore or Selected For
Restore), and enter the known portion of the path name in the Substring box. Click Apply; all items in the
selected list which contain that string will be highlighted. (Use the scroll bars to view the portions of the list
which extend beyond the viewing area of the selected list box. Note that entries containing the known
string are not necessarily adjacent.)
When the Selected button for System Configuration Data is clicked on, the System Configuration Data
window (
Figure 11-44 ) will be displayed.
This window allows selection of individual Micro-PWC system configuration elements for synchronization.
Click Set All to quickly select all Micro-PWC configuration data for backup; click Clear All to quickly dese-
lect multiple items. When Default is clicked, the current selections will be cleared, and the software will
automatically select a pre-determined set of items to synchronize.
Items which are omitted from the default set are those with the potential for causing obvious problems,
such as replacement of passwords to user login accounts with unknown passwords, conflicting requests
Figure 11-43. Find Window
Figure 11-44. System Configuration Data Window