Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 56)

Micro-PWC OPERATOR’S MANUAL
42 Hierarchical Process Displays
Alternatively, click on this pushbutton using the left mouse button to display the Group Information window
(
Figure 4-5 ), which provides access to the Group Display or to individual Point Displays.
The Group Information window provides an overview of a group of points, listing both the point name and
the status of each point. From this window, it is possible to go directly to any one of the following displays:
• the Group Display for the group
• the Point Display for any point in the group
• the Graphic Display assigned to the group
• the Trend Display assigned to the group
• the Next or Previous Group Display
The top portion of the Group Information window contains a list of points assigned to the group. The tag-
name for each point is located on the face of a pushbutton. To the right of each tagname pushbutton is a
field which reports the status of the point. To call up the Point Display for a point in the group, click the but-
ton which contains the point’s tagname. To call up the Graphic or Trend display assigned to the Group,
click on the Graphic or Trend button located below the Point information area.
To call up the Group Display, click on the Group button onGroup Information window, or click OK.
To view the Group Display for the previous Group in the Summary Display, click Prev; to view the Group
Display for the next Group, click Next. Wrap is provided between the first and last available groups; groups
which have not been configured are ignored.
Alarms cannot be acknowledged from the Summary Display, nor can they be acknowledged from the
Group Information window. The
A LT -F10 (Window Acknowledge) key has no effect when the window with
focus contains a Summary Display. Alarms can be acknowledged from Group, Point, Graphic and Alarm
Review displays, or from the Mini-Alarm Window.
Figure 4-5. Group Information Window