Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 157)

Micro-PWC OPERATOR’S MANUAL
Utilities 143
11.13.2 Selecting a Console Node to Synchronize With
To synchronize a configuration type or item on the local system with that in another console group, go to
the System Window and select Menu > Utilities > Console Group Sync. The Console Group Synchroniza-
tion window (
Figure 11-39 ) will be displayed.
The Console Group Synchronization window provides the number of the local group, plus a list box listing
the other available console groups. For each console group, the Node Name of each console type node in
the group is shown.
The Node Name is the machine name of the node's computer, and appears on the icon for the node in the
System Status Display (e.g., CON1, CON10, and so on).
If you know the node name of the console node with which you want to synchronize the local configuration
item, but do not know which console group it is in, you can locate it quickly in the list by clicking the Find
Group button. A pop-up window will appear, which prompts:
Enter Node Name
Enter the node name in the entry box, then click OK. The entry for the group containing this node will be
selected. Note that this item is case-sensitive; you must enter the node name using the proper case. If the
wrong case is used, the node name will not be found, and an error pop-up will appear.
Click the entry for the console group from which you want to obtain configuration data.
Once a console group has been selected, click the SYNC button on the Console Group Synchronization
window. If there are multiple nodes in the console group, the Console Node Selection window (
Figure 11-
Figure 11-39. Console Group Synchronization Window