Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 49)

Micro-PWC OPERATOR’S MANUAL
Micro-PWC Features 35
Select Utilities > Device Status to access the printer control utilities and display the Device Status window
shown in
Figure 3-10 . If no devices are configured, a confirmation box will appear which contains an error
message informing the user that no devices are configured.
The Device Status window provides information about items being printed. It also provides access to job
and printer control. The following information is provided for each device:
• Device name
• Device status
• Node
• Active backup unit name (Assign)
• Queue size
• Number of queue entries
• Size of current job
• Percent of current job printed
3.4.2.4 Printer Queue Control
The column labelled Device Name contains a button for each device which has been defined via Printer
Assignment configuration (see the Micro-PWC Configuration Guide). The name of the device appears on
the face of the button. The color of the button indicates the status of the device:
• Green indicates the device is operating NORMALLY.
• Red indicates the device has FAILED.
• Yellow indicates the device has been placed in SUSPEND mode.
In addition to button color, the Device Status field to the right of each Device Name button provides status
indication in text form, i.e., it will display the word Normal, Failed or Suspended.
TC00538A
Figure 3-10. Device Status Window
✎ NOTE When the button color changes to indicate the device status, the
text on the button also changes color so that it remains visible. The
text color has no other significance.