Abbott Freestyle PRT03831-xxx - Manual (Page 115)

OVER
Skin irritation at sensor insertion site.
a. Ensure that seams, waistbands, or other constrictive
clothing or accessories do not cover the site causing
friction.
b. Inspect the site.
c. If none of the above works, consult your healthcare
team for other suggestions.
The sensor support mount is not sticking to your skin.
Note: Do Step a through Step c BEFORE placing the
sensor support mount on your skin.
a. Clean the insertion site by washing with soap and water.
b. Dry the site thoroughly with a clean towel.
c. Wipe the area with an alcohol prep pad.
d. If your skin-type requires more adhesive than provided
on the sensor support mount, or if you anticipate an
activity level that may require more adhesive, place an
over-bandage over the transmitter AFTER connecting
the transmitter to the sensor support mount.
Around the edges of the adhesive
or tape.
Lift the edges slightly all around the
dressing.
Wherever the adhesive touches skin. You may be sensitive to the adhesive or
material, consult your healthcare team
to identify the best solution.
If the irritation is Then
Section 10 105
Respond to Alarms, Errors, and Problems