Steps do this 1, If you want to then go to this step – Abbott Freestyle PRT03831-xxx User Manual
Page 92
Steps
Do This
1.
Decide what to do.
2.
Reconnect the receiver to the
transmitter.
a. Place the receiver within 10 feet of the transmitter.
b. Decide what to do next.
• Connect your receiver and transmitter.
2
• Reconnect your receiver and transmitter.
2
• Interpret the CM screen.
3
• Interpret icons on the CM screen.
4
• Interpret icons on the Main screen.
4
• Turn the receiver backlight on.
5
If you want to
Then go to this Step
• For less than 30 minutes.
1. Wait for the connection icon
to disappear
automatically from the display to confirm
connection.
2. Go back to Step 1 of Section 9.
• For 30 minutes or more.
1. Press the RIGHT Option button twice to
display the Main Menu screen.
2. Use the UP/DOWN Arrow button to highlight
System.
3. Press the RIGHT Option button (Select) to
display the System menu with Reconnect
highlighted.
4. Press the RIGHT Option button (Select).
5. Wait for the receiver to beep. If it beeps:
• Twice – the system is connected. Go back to
Step 1 of Section 9.
• Three times – the system is not connected.
Make sure the battery in the transmitter
is new and ensure that the receiver and
transmitter are linked (see Section 14).
If the receiver has
Then
lost connection
Customer Care: 1-866-597-5520
82
Section 9
Daily Use
System Menu 08:30A
Reconnect
Data Upload
Status
Link
Set Date/Time
Main Select