Abbott Freestyle PRT03831-xxx - Manual (Page 39)

OVER
Steps Do This
3.
Insert test strip into the receiver.
a. Turn the test strip so “FreeStyle” text faces up.
b. Grasp the test strip by the end with the two half circles.
c. Insert the end with the dark rectangle into the receiver
at the lower left corner of the receiver.
Result: The receiver display screen turns on and displays
the Strip Code screen.
Note: If the screen does not turn on, refer to Section 10
on troubleshooting.
4.
Compare code numbers.
Compare the code number on the display with the code
number on the vial of test strips.
• The numbers match. a. Press the RIGHT Option button (Set).
b. Go to Step 5.
• The numbers do NOT match. a. Use the UP/DOWN Arrow buttons to
change the code to match.
b. Press the RIGHT Option button (Set).
c. Go to Step 5.
• The screen changes to the Apply
Sample screen.
If the numbers did NOT match:
a. Press the LEFT Option button (Back).
b. Repeat Step 4.
If the numbers match, go to Step 5.
If Then
Section 4 29
Perform a Control Solution Test
Strip Code 08:30A
Cancel Set
27